hbacmd utility

$ hbacmd -hUsage: hbacmd { h=IP Address or Hostname{:port} }
Valid Commands:
Version
ListHBAs
HBAAttrib
PortAttrib
PortStat
ServerAttrib
TargetMapping
Reset
Download
PersistentBinding
Source: {C L}
C: Configuration
L: Live
AllNodeInfo
SetPersistentBinding
Scope: {P I B}
P: Bind set Permanently
I: Bind set Immediately
B: Bind set Both Immediately and at Reboot
BindType: {D P N}
D: Enable binding by D_ID
P: Enable binding by WWPN
N: Enable binding by WWNN
Id: Either WWPN, WWNN, or D_ID (depending on BindType)
RemoveAllPersistentBinding
RemovePersistentBinding
BindType: {D P N}
D: Enable binding by D_ID
P: Enable binding by WWPN
N: Enable binding by WWNN
Id: Either WWPN, WWNN, or D_ID (depending on BindType)
BindingCapabilities
BindingSupport
Source: {C L}
C: Configuration
L: Live
SetBindingSupport
BindFlag: {D P N A DA PA NA}
D: Enable binding by D_ID
P: Enable binding by WWPN
N: Enable binding by WWNN
A: Enable binding by AUTOMAP
DA: Enable binding by D_ID and AUTOMAP
PA: Enable binding by WWPN and AUTOMAP
NA: Enable binding by WWNN and AUTOMAP
DriverParams
DriverParamsGlobal
SetDriverParam

CtrlWord: {P G B N}
P: Permanent
G: Global
B: Both
N: Neither
SetBootBios
CtrlWord: {E D}
E: Enable
D: Disable
To view all of the Emulex HBAs installed in a server, hbacmd(1m) can be invoked with the “listhbas” option:
$ hbacmd listhbasManageable HBA List
Port WWN : 10:00:00:00:c9:49:28:42
Node WWN : 20:00:00:00:c9:49:28:42
Fabric Name: 10:00:00:60:69:80:2d:ee
Flags : 8000f980
Host Name : server01
Mfg : Emulex Corporation
Port WWN : 10:00:00:00:c9:49:28:47
Node WWN : 20:00:00:00:c9:49:28:47
Fabric Name: 10:00:00:60:69:80:0e:fc
Flags : 8000f980
Host Name : fraudmgmt01
Mfg : Emulex Corporation
[ ..... ]
To list firmware versions, serial numbers, WWN and a variety of model specific information, the hbacmd(1m) utility can be invoked with the “hbaattrib” option and the WWN to probe:
$ hbacmd HBAAttrib 10:00:00:00:c9:49:28:47HBA Attributes for 10:00:00:00:c9:49:28:47
Host Name : server01
Manufacturer : Emulex Corporation
Serial Number : MS51403247
Model : LP9802
Model Desc : Emulex LightPulse LP9802 2 Gigabit PCI Fibre Channel Adapter
Node WWN : 20 00 00 00 c9 49 28 47
Node Symname : Emulex LP9802 FV1.91A1 DV6.02f
HW Version : 2003806d
Opt ROM Version: 1.50a4
FW Version : 1.91A1 (H2D1.91A1)
Vender Spec ID : 80F9
Number of Ports: 1
Driver Name : lpfc
Device ID : F980
HBA Type : LP9802
Operational FW : SLI-2 Overlay
SLI1 FW : SLI-1 Overlay 1.91a1
SLI2 FW : SLI-2 Overlay 1.91a1
IEEE Address : 00 00 c9 49 28 47
Boot BIOS : Fcode Firmware1.50a4
Driver Version : 6.02f; HBAAPI(I) v2.0.e, 11-07-03
To view host port information (e.g., port speed, device paths) and fabric parameters (e.g., fabric ID (S_ID), # of ports zoned along with this port), hbacmd(1m) can be invoked with the “portattrib” option:
$ hbacmd PortAttrib 10:00:00:00:c9:49:28:47Port Attributes for 10:00:00:00:c9:49:28:47
Node WWN : 20 00 00 00 c9 49 28 47
Port WWN : 10 00 00 00 c9 49 28 47
Port Symname :
Port FCID : 6D0900
Port Type : Fabric
Port State : Operational
Port Service Type : 6
Port Supported FC4 : 00 00 01 20 00 00 00 01
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
Port Active FC4 : 00 00 01 20 00 00 00 01
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
Port Supported Speed: 2 GBit/sec.
Port Speed : 2 GBit/sec.
Max Frame Size : 2048
OS Device Name : /devices/pci@84,2000/lpfc@1
Num Discovered Ports: 3
Fabric Name : 10 00 00 60 69 80 0e fc